Γενικα > Γενικά

SPS Motorsport

<< < (3/14) > >>

Guido@SPS:
One customer brought us his car to get a suspension adjustment with his new rims, tires and our coilover.
We like this setup. The car has a sporty look.

Setup: Enkei RPF1 8x16 with 38mm offset on Yokohama Advan AD08R 225/45 R16 and our SPS coilover for the ND









Best regards
Guido from SPS

Guido@SPS:
This a good example for a really tough build! We made the car ready for Time Attack races, but the car is still allowed to drive on street.

Some specs:
1.6L forged Block with an EFR 6258 turbocharger (over 300hp)
full 3" exhaust with HJS catalytic converter
Competition Clutch Stage 3 Clutch
Megasquirt MS2 pnp
6-speed manual gearbox
Kaaz LSD
Engine-, gearbox- and differential cooling
BC Racing ER-series suspension
K-Sport 6-piston 286mm big brake upgrade
Nankang AR-1 205/50 R15
Sparco Sprint seats with Sparco 4-point harness
Full roll over protection system
Nardi steering wheel











Best regards
Guido from SPS

vdsracing:

--- Quote from: Guido@SPS on May 31, 2019, 11:59:49 AM ---This a good example for a really tough build! We made the car ready for Time Attack races, but the car is still allowed to drive on street.

Some specs:
1.6L forged Block with an EFR 6258 turbocharger (over 300hp)
full 3" exhaust with HJS catalytic converter
Competition Clutch Stage 3 Clutch
Megasquirt MS2 pnp
6-speed manual gearbox
Kaaz LSD
Engine-, gearbox- and differential cooling
BC Racing ER-series suspension
K-Sport 6-piston 286mm big brake upgrade
Nankang AR-1 205/50 R15
Sparco Sprint seats with Sparco 4-point harness
Full roll over protection system
Nardi steering wheel











Best regards
Guido from SPS

--- End quote ---

Nice.! Can you share your spring rates,arb and alignment settings?

Guido@SPS:
Hi, the spring rates are front 10kg and rear 8kg. The alignment setting depends on the use of the car. The customer drives firstly on the street, so we didn't make the dampers to stiff.

Best regards
Guido from SPS

Guido@SPS:
This time a really cool sleeper met us.

It has a Rotrex C30/94 supercharger on a 2.0l making 345hp and 360Nm of torque.
The car drives really nice because it feels like a big natural aspirated engine. High speed runs on the German Autobahn are no problem. ;)

The rest of the setup:
- Flyin Miata Header
- HJS 200 cells catalytic converter
- SPS Motorsport Catback
- Cat Cams Stage 1 camshafts
- forged pistons (compression 13:1)
- forged rods
- 750ccm injectors
- BC Racing BR-series coilover
- OZ Ultraleggera 8x17 with 40mmm offset on Yokohama AD08R 215/45 R17 tires
- K-Sport 8 piston calipers











Best regards
Guido from SPS

Navigation

[0] Message Index

[#] Next page

[*] Previous page