!!
Η εγγραφή και η χρήση του φόρουμ είναι εντελώς δωρεάν και σας δίνουν πρόσβαση σε όλα τα τεχνικά θέματα του
http://mymx5.gr/forum/index.php?action=register
Γενικα > Γενικά
SPS Motorsport
Guido@SPS:
Hi drkonos,
it depends on Your engine setup.
A stage 2 clutch is absolutely enough for a natural aspirated engine, also when it has an individual throttle body installed. The stage 2 feels pretty similar to a stock clutch.
For turbo- or supercharger conversions we recommend at least a stage 3 clutch, just to be sure the clutch is able to deliver the torque. We always recommend the stage 3 for one of our standard turbo conversions on NA/NB/NC. The stage 3 is a little more difficult to handle, but if You use it for a while You will get into it. Then it works for daily. Our customers are very happy with the clutch solutions we offer and recommend them.
Best regards
Guido from SPS
Guido@SPS:
Here we have one of a rarer conversion, a rotrex C15-60 supercharger. The 1.8L BP engine produces 200 hp with 242 Nm/178 lbft torque. It also has a Stoptech Big Brake Kit, some 15" Rota Grid wheels with Federal 595 RS-R tires in 205/50 ZR15, a SPS "Extreme" rollbar, a race header, a mishimoto radiator and our coilover setup.
Best regards
Guido from SPS
Guido@SPS:
Here You can see a really serious project.
This NC is getting a Borg Warner EFR7163 turbocharger on a forged engine running with 1.3 bar boost tuned with a MS3. It will produce around 400hp at the flywheel with 455Nm/336lbft torque.
It also gets a full roll cage, fender flares, gearbox oil cooling system and differential oil cooling system.
Best regards
Guido from SPS
Guido@SPS:
Hello guys,
the first post in 2020, this time something special.
We also restore complete cars. The customer made the decision to restore his car completely from zero to the top.
It gets a new painting, new seals, new gaskets, new rubbers, a new windshield, a rollbar, Lotus Elise seats, a turboconversion (Borg Warner EFR 6758), a SPS coilover setup, and some nice wheels and tires.
We are filming the whole process and creating a time lapse video.
Best regards
Guido from SPS
Guido@SPS:
Some progress is going on. ;)
Best regards
Guido from SPS
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version